manualshive.com logo in svg

Cisco CISCOWORKS COMMON SERVICES 3.0, User Manual

The Cisco CISCOWORKS COMMON SERVICES 3.0 User Manual is your essential guide to optimizing network management and performance. Download this comprehensive manual for free from our website, providing step-by-step instructions and valuable insights on harnessing the full potential of this powerful product.

Share
Download
background image

C H A P T E R

 

7-1

User Guide for CiscoWorks Common Services

78-16571-01

7

Working With Software Center

Software Center helps you to check for software and device support updates, 
download them to their server file system along with the related dependent 
packages, and install the device updates.

Software Center allows you to look for software and device updates from 
Cisco.com, and download them to a server location. You can install the updates 
from this location. In the case of device updates, Software Center helps you to 
install the updates using a web based user interface, wherever possible.

Most of the device family-based packages can be installed directly from the web 
interface while the device support packages such as IDU have to be installed 
based on the installation instructions documented in the respective readme files.

You may also uninstall a device support package. Software Center does not 
support uninstallation of software updates.

To backup what is installed on the server, Software Center maintains a package 
and device map in the installed packages directory of the respective applications. 
The package map is a list of all device packages installed on the server and device 
map is a list of all the supported devices on the server.

Software Center also provides a Command Line Interface to download device 
updates and software updates, and install or uninstall device packages.

For downloads from Cisco.com to work, you should have access to Cisco.com. 
For details on configuring Cisco.com credentials, See 

“Setting up Cisco.com User 

Account” section on page 3-44

.

Summary of Contents for CISCOWORKS COMMON SERVICES 3.0































































































































































































































































































Reviews:

No comments

Related manuals for CISCOWORKS COMMON SERVICES 3.0

Palm Pixi Plus Get Started preview
Pixi Plus
Brand: Palm Pages: 28
Palm 700wx - Treo Smartphone 60 MB Quick Start Manual preview
700wx - Treo Smartphone 60 MB
Brand: Palm Pages: 2
Palm 700wx - Treo Smartphone 60 MB Setting Up preview
700wx - Treo Smartphone 60 MB
Brand: Palm Pages: 30
Palm 700w - Treo Smartphone 60 MB Addendum preview
700w - Treo Smartphone 60 MB
Brand: Palm Pages: 14
Patton electronics SL4050/B12/E Getting Started Manual preview
SL4050/B12/E
Brand: Patton electronics Pages: 79
Talkswitch TS-9112i Installation Manual preview
TS-9112i
Brand: Talkswitch Pages: 29
Talkswitch TS-480i Using Manual preview
TS-480i
Brand: Talkswitch Pages: 3
Samsung SM-A356E User Manual preview
SM-A356E
Brand: Samsung Pages: 155
Audiovox CDM 8900 Owner'S Manual preview
CDM 8900
Brand: Audiovox Pages: 137
Alcatel TRU 5065N Quick Start Manual preview
TRU 5065N
Brand: Alcatel Pages: 51
Audiovox BAM-101 User Manual preview
BAM-101
Brand: Audiovox Pages: 39
Kyocera Sprint Torcque XT User Manual preview
Sprint Torcque XT
Brand: Kyocera Pages: 209
Sony Ericsson T62u User Manual preview
T62u
Brand: Sony Ericsson Pages: 99
SMART Ultrai8513 User Manual preview
Ultrai8513
Brand: SMART Pages: 16
T-Mobile REVVL XT1952-T Welcome Start Manual preview
REVVL XT1952-T
Brand: T-Mobile Pages: 2
Avaya T3 Classic Operating Instructions Manual preview
T3 Classic
Brand: Avaya Pages: 172
Docomo SO-51A Instruction Manual preview
SO-51A
Brand: Docomo Pages: 262
Alcatel OT-E260 User Manual preview
OT-E260
Brand: Alcatel Pages: 61

Brands by name

Popular brands

Load more brands