manualshive.com logo in svg

Cisco CISCOWORKS COMMON SERVICES 3.0, User Manual

The Cisco CISCOWORKS COMMON SERVICES 3.0 User Manual is your essential guide to optimizing network management and performance. Download this comprehensive manual for free from our website, providing step-by-step instructions and valuable insights on harnessing the full potential of this powerful product.

Share
Download
background image

 

Chapter 4      Managing Device and Credentials

    Administering Device and Credential Repository

4-28

User Guide for CiscoWorks Common Services

78-16571-01

Changing the Mode to Master

Before you change the mode to Slave, ensure that 

Master-Slave Configuration 

Prerequisites

 are in place.

Step 1

Select the Master radio button.

Step 2

Click Apply to change mode.

Changing the Mode to Slave

Before you change the mode to Slave, ensure that 

Master-Slave Configuration 

Prerequisites

 are in place.

You need to perform the following tasks:

Step 1

Select the Slave radio button.

Step 2

Enter the hostname of the Master in the Master field.

Note

This hostname should exactly match the Hostname field in the Master's 
Self Signed Certificate.

Step 3

Specify the SSL port of the master. Default is 443.

•

If the mode is changed from Master to Slave, select the Inform Current 
slave(s) of new Master Hostname check box.

If you select this check box, all the slaves of the Master (whose mode you 
currently changed to Slave) will be informed of the new master hostname. 
That is, they will become the slaves of the new Master.

•

If the Add new devices to Master check box is selected, the devices in Slave 
will be added to the new Master. However, any duplicates will be discarded.

Step 4

Click Apply.

Summary of Contents for CISCOWORKS COMMON SERVICES 3.0































































































































































































































































































Reviews:

No comments

Related manuals for CISCOWORKS COMMON SERVICES 3.0

i.safe MOBILE IS330.1 Quick Start Manual preview
IS330.1
Brand: i.safe MOBILE Pages: 21
Samsung Rugby II SGH-A847 User Manual preview
Rugby II SGH-A847
Brand: Samsung Pages: 187
Krüger & Matz KM0432 Owner'S Manual preview
KM0432
Brand: Krüger & Matz Pages: 20
Doro PhoneEasy 312cs User Manual preview
PhoneEasy 312cs
Brand: Doro Pages: 88
RATH MICROTECH SMARTPHONE II Simplified Programming Instructions preview
SMARTPHONE II
Brand: RATH MICROTECH Pages: 2
Bea-fon SL570 User Manual preview
SL570
Brand: Bea-fon Pages: 70
Blu Dash Music User Manual preview
Dash Music
Brand: Blu Pages: 21
Aastra SIP SIP9133i User Manual preview
SIP SIP9133i
Brand: Aastra Pages: 22
Linksys SPA901 User Manual preview
SPA901
Brand: Linksys Pages: 5
Thrane&Thrane Capsat TT-3060A User Manual preview
Capsat TT-3060A
Brand: Thrane&Thrane Pages: 182
Alcatel one touch 219C User Manual preview
one touch 219C
Brand: Alcatel Pages: 27
Mio Digi Walker 8870 User Manual preview
Digi Walker 8870
Brand: Mio Pages: 223
Kyocera Jax S1360 User Manual preview
Jax S1360
Brand: Kyocera Pages: 67
Hisense Communications C389 User Manual preview
C389
Brand: Hisense Communications Pages: 24
Zte 8000 Quick Start Manual preview
8000
Brand: Zte Pages: 12
Zte BLADE VANTAGE User Manual preview
BLADE VANTAGE
Brand: Zte Pages: 158
D-Link DPH-70 User Manual preview
DPH-70
Brand: D-Link Pages: 31
Avvio 400X Manual preview
400X
Brand: Avvio Pages: 45

Brands by name

Popular brands

Load more brands