manualshive.com logo in svg

Cisco CISCOWORKS COMMON SERVICES 3.0, User Manual

The Cisco CISCOWORKS COMMON SERVICES 3.0 User Manual is your essential guide to optimizing network management and performance. Download this comprehensive manual for free from our website, providing step-by-step instructions and valuable insights on harnessing the full potential of this powerful product.

Share
Download
background image

 

7-3

User Guide for CiscoWorks Common Services

78-16571-01

Chapter 7      Working With Software Center

    Performing Software Updates

Step 4

Enter the location, or browse to the location using the Browse tab, then click 
Next. The destination location should not be the location where CiscoWorks is 
installed.

The Summary window shows a summary of your inputs.

Step 5

Click Finish to confirm the download operation.

To change the download location, click Back.

To cancel the download, click Cancel.

To select updates:

Step 1

In the CiscoWorks Homepage, select Common Services > Software Center > 
Software Updates.

The Software Updates page appears.

Step 2

In the Products Installed dialog box, select the check box corresponding to the 
product for which you want to select update.

Step 3

Click Select Updates.

Step 4

Select the product you need to update, then click Next.

Step 5

Select a destination location, then click Next. The destination location should not 
be the location where CiscoWorks is installed.

The Download Summary window appears.

Step 6

Click Finish to confirm installation of the selected packages.

If you do not want to add the selected packages, click Back to reselect packages 
or click Cancel to exit.

Summary of Contents for CISCOWORKS COMMON SERVICES 3.0































































































































































































































































































Reviews:

No comments

Related manuals for CISCOWORKS COMMON SERVICES 3.0

Pantech Verizon Jest 2 User Manual preview
Verizon Jest 2
Brand: Pantech Pages: 182
Pantech Pursuit II User Manual preview
Pursuit II
Brand: Pantech Pages: 88
Pantech PG-1410 User Manual preview
PG-1410
Brand: Pantech Pages: 4
Pantech Pantech Perception User Manual preview
Pantech Perception
Brand: Pantech Pages: 202
Pantech G800 Setup Manual preview
G800
Brand: Pantech Pages: 3
Pantech Discover Guía Del Usuario preview
Discover
Brand: Pantech Pages: 120
Pantech DEL USUARIO PG-1610 User Manual preview
DEL USUARIO PG-1610
Brand: Pantech Pages: 79
Pantech AT&T Laser User Manual preview
AT&T Laser
Brand: Pantech Pages: 169
Pantech Verse Quick Start Manual preview
Verse
Brand: Pantech Pages: 42
Verykool W92159B3 Manual preview
W92159B3
Brand: Verykool Pages: 23
Talkswitch TS-550i User Manual preview
TS-550i
Brand: Talkswitch Pages: 83
Audiovox BAM-101 User Manual preview
BAM-101
Brand: Audiovox Pages: 39
Archos 35 Titanium Faqs preview
35 Titanium
Brand: Archos Pages: 14
Audiovox Technophone PC200 User Manual preview
Technophone PC200
Brand: Audiovox Pages: 12
Pantech TX-1000C User Manual preview
TX-1000C
Brand: Pantech Pages: 70
Polycom Soundpoint 335 Configuring preview
Soundpoint 335
Brand: Polycom Pages: 9
GAI-Tronics L3149B Manual preview
L3149B
Brand: GAI-Tronics Pages: 92
Grandstream Networks GXP2130v2 User Manual preview
GXP2130v2
Brand: Grandstream Networks Pages: 12

Brands by name

Popular brands

Load more brands