75-23
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 75 Configuring Ethernet OAM and CFM
Configuring Ethernet CFM
To remove an IP SLAs operation, enter the
no
ip sla
operation-number
global configuration command.
The following example shows how to configure an IP SLAs Operation with Endpoint Discovery:
Switch(config)#
ip sla ethernet-monitor 10
Switch(config-ip-sla-ethernet-monitor)#
type echo domain abc vlan 34
Switch(config-ip-sla-ethernet-params)#
exit
Switch(config)#
ip sla ethernet-monitor schedule 10 schedule-period 60 start-time now
Switch(config)#
exit
Switch#
show ip sla ethernet-monitor configuration 10
Entry Number : 10
Modification time : *10:12:01.725 UTC Mon Nov 29 2010
Operation Type : echo
Domain Name : abc
VLAN ID : 5
Excluded MPIDs :
Owner :
Tag :
Timeout(ms) : 5000
Threshold(ms) : 5000
Frequency(sec) : 60
Step 11
Switch(config)#
ip sla schedule
operation-number
[
ageout
seconds
] [
life
{
forever |
seconds
}] [
recurring
] [
start-time
{
hh:mm {:ss
} [
month day
|
day month
] |
pending
|
now
|
after
hh:mm:ss
}]
Schedules the time parameters for the IP SLAs operation.
•
operation-number
—Enter the IP SLAs operation
number.
•
(Optional)
ageout
seconds
—Enter the number of
seconds to keep the operation in memory when it is not
actively collecting information. The range is 0 to
2073600 seconds. The default is 0 seconds.
•
(Optional)
life
—Set the operation to run indefinitely
(
forever
) or for a specific number of
seconds
. The
range is from 0 to 2147483647. The default is 3600
seconds (1 hour)
•
(Optional)
recurring
—Set the probe to be
automatically scheduled every day.
•
(Optional)
start-time
—Enter the time for the
operation to begin collecting information:
–
To start at a specific time, enter the hour, minute,
second (in 24-hour notation), and day of the
month.
–
Enter
pending
to select no information collection
until a start time is selected.
–
Enter
now
to start the operation immediately.
–
Enter
after
hh:mm:ss
to show that the operation
should start after the entered time has elapsed.
Step 12
Switch(config)#
end
Returns to privileged EXEC mode.
Step 13
Switch#
show ip sla ehternet-monitor
configuration
[
operation-number
]
Shows the configured IP SLAs Auto Ethernet Monitor
operation.
Step 14
Switch#
copy running-config startup-config
(Optional) Saves your entries in the configuration file.
Command
Purpose
Summary of Contents for Catalyst 4500 Series
Page 2: ......
Page 4: ......
Page 2086: ...Index IN 46 Software Configuration Guide Release IOS XE 3 9 0E and IOS 15 2 5 E ...
