manualshive.com logo in svg

Cisco Catalyst 4500 Series, Software Configuration Manual

The Cisco Catalyst 4500 Series is a powerful network switch offering seamless connectivity and efficient performance. To unlock the full potential of this product, users can easily download the comprehensive Command Reference Manual for free from our website, ensuring hassle-free operation and optimal network management.

Share
Download
background image

59-28

Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex

 

Chapter 59      Configuring the Cisco IOS DHCP Server

Configuration Examples for the Cisco IOS DHCP Server

Example: Configuring Static Mapping

The following example shows how to restart the DHCP server, configure the pool, and specify the URL 
where the static mapping text file is stored:

Switch# 

configure terminal

Switch(config)# 

no service dhcp

Switch(config)# 

service dhcp

Switch(config)# 

ip dhcp pool pool1

Switch(dhcp-config)# 

origin file tftp://10.1.0.1/static-bindings

Switch(dhcp-config)# 

end

Note

The static mapping text file can be copied to flash memory on the device and served by the TFTP process 
of the device. In this case, the IP address in the original file line must be an address owned by the device 
and one additional line of configuration is required on the device:tftp-server flash static-filename.

The following sample output from the 

show ip dhcp binding

 command displays address bindings that 

are configured:

Device# 

show ip dhcp binding

00:05:14:%SYS-5-CONFIG_I: Configured from console by console

Bindings from all pools not associated with VRF:

IP address  Client-ID/            Ls expir   Type    Hw address           User name

10.9.9.4/8  0063.7363.2d30.3036.  Infinite   Static  302e.3762.2e39.3634. 632d.4574.8892.

10.9.9.1/24 0063.6973.636f.2d30.  Infinite   Static  3036.302e.3437.3165. 2e64.6462.342d.

The following sample output displays each entry in the static mapping text file

*time* Jan 21 2005 22:52 PM

!IP address     Type        Hardware address                              Lease expiration

10.19.9.1 /24    id          0063.6973.636f.2d30.3036.302e.3437

10.9.9.4         id          0063.7363.2d30.3036.302e.3762.2e39.3634.632d  Infinite

*end*

The following sample debug output shows the reading of the static mapping text file from the TFTP 
server:

Switch# 

debug ip dhcp server

Loading abc/static_pool from 10.19.192.33 (via Ethernet0):

[OK - 333 bytes]

*May 26 23:14:21.259: DHCPD: contacting agent tftp://10.19.192.33/abc/static_pool (attempt 

0)

*May 26 23:14:21.467: DHCPD: agent tftp://10.19.192.33/abc/static_pool is responding.

*May 26 23:14:21.467: DHCPD: IFS is ready.

*May 26 23:14:21.467: DHCPD: reading bindings from tftp://10.19.192.33/abc/static_pool.

*May 26 23:14:21.707: DHCPD: read 333 / 1024 bytes.

*May 26 23:14:21.707: DHCPD: parsing text line 

*time* Apr 22 2002 11:31 AM

*May 26 23:14:21.707: DHCPD: parsing text line ““

*May 26 23:14:21.707: DHCPD: parsing text line

!IP address Type Hardware address Lease expiration

*May 26 23:14:21.707: DHCPD: parsing text line

“10.9.9.1 /24 id 0063.6973.636f.2d30.3036.302e.3437”

*May 26 23:14:21.707: DHCPD: creating binding for 10.9.9.1

*May 26 23:14:21.707: DHCPD: Adding binding to radix tree (10.9.9.1)

*May 26 23:14:21.707: DHCPD: Adding binding to hash tree

*May 26 23:14:21.707: DHCPD: parsing text line

“10.9.9.4 id 0063.7363.2d30.3036.302e.3762.2e39.3634.632d”

*May 26 23:14:21.711: DHCPD: creating binding for 10.9.9.4

Summary of Contents for Catalyst 4500 Series







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Catalyst 4500 Series

Draytek VigorIPPBX 2820 Series Quick Start Manual preview
VigorIPPBX 2820 Series
Brand: Draytek Pages: 29
Black Box LT2060A Manual preview
LT2060A
Brand: Black Box Pages: 37
Watchguard XTM 850 Hardware Manual preview
XTM 850
Brand: Watchguard Pages: 30
Kontron 50099 067 User Manual preview
50099 067
Brand: Kontron Pages: 42
Xenya XS26GS User Manual preview
XS26GS
Brand: Xenya Pages: 189
B+B SmartWorx spectre lte User Manual preview
spectre lte
Brand: B+B SmartWorx Pages: 52
IDT 89HPES16NT2 User Manual preview
89HPES16NT2
Brand: IDT Pages: 292
NKE BOX Wi-Fi User Manual And Installation Manual preview
BOX Wi-Fi
Brand: NKE Pages: 15
Ubiquiti airMAX NanoBridge M NBM3 Quick Start Manual preview
airMAX NanoBridge M NBM3
Brand: Ubiquiti Pages: 24
DHD Power Cruiser 52/XR Manual preview
52/XR
Brand: DHD Power Cruiser Pages: 60
Mobily NTC-40WV-QSG Quick Start Manual preview
NTC-40WV-QSG
Brand: Mobily Pages: 12
ActiveEye K9504L-W Operation Manual preview
K9504L-W
Brand: ActiveEye Pages: 35
Tripp Lite N201-014-BL Specification Sheet preview
N201-014-BL
Brand: Tripp Lite Pages: 3
Planet FNSW-1600P User Manual preview
FNSW-1600P
Brand: Planet Pages: 16
Vivotek ND8212W Hardware Installation Manual preview
ND8212W
Brand: Vivotek Pages: 46
Broadband Products Xtreme Networked Boat User Manual preview
Xtreme Networked Boat
Brand: Broadband Products Pages: 16
M86 Security IR Web Filter User Manual preview
IR Web Filter
Brand: M86 Security Pages: 540
StarTech.com PCI555WG Instruction Manual preview
PCI555WG
Brand: StarTech.com Pages: 16

Brands by name

Popular brands

Load more brands