Cisco Catalyst 4500 Series, Software Configuration Manual

Page: 247 / 2086

5-21
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 5 Configuring Virtual Switching Systems
Understanding Virtual Switching Systems
Switch# show switch virtual slot-map
Virtual Slot to Remote Switch/Physical Slot Mapping Table:
Virtual Remote Physical Module
Slot No Switch No Slot No Uptime
---------+-----------+----------+----------
1 1 1 -
2 1 2 -
3 1 3 02:43:51
4 1 4 -
5 1 5 -
6 1 6 02:45:20
7 1 7 -
8 1 8 02:43:50
9 1 9 -
10 1 10 -
11 2 1 02:46:50
12 2 2 02:46:50
13 2 3 -
14 2 4 -
15 2 5 02:42:23
16 2 6 -
17 2 7 -
18 2 8 -
19 2 9 -
20 2 10 -
Network Management
The following sections describe network management for a VSS:
•
Telnet over SSH Sessions and the Web Browser User Interface, page 5-21
• SNMP, page 5-21
•
Command Console, page 5-22
• Accessing the Remote Console on VSS, page 5-22
•
Copying Files to Bootflash, page 5-22
•
Transferring a Large File over VSL, page 5-23
Telnet over SSH Sessions and the Web Browser User Interface
A VSS supports remote access using Telnet over SSH sessions and the Cisco web browser user interface.
All remote access is directed to the VSS Active supervisor engine, which manages the whole VSS.
If the VSS performs a switchover, Telnet over SSH sessions and web browser sessions are disconnected.
SNMP
The SNMP agent runs on the VSS Active supervisor engine.
CISCO-VIRTUAL-SWITCH-MIB is a new MIB for virtual switch mode and contains the following
main components:
•
cvsGlobalObjects — Domain #, Switch #, Switch Mode
•
cvsCoreSwitchConfig — Switch Priority
•
cvsChassisTable — Switch Role and Uptime