manualshive.com logo in svg

Cisco Catalyst 4500 Series, Software Configuration Manual

The Cisco Catalyst 4500 Series is a powerful network switch offering seamless connectivity and efficient performance. To unlock the full potential of this product, users can easily download the comprehensive Command Reference Manual for free from our website, ensuring hassle-free operation and optimal network management.

Share
Download
background image

68-15

Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex

 

Chapter 68      Configuring Wireshark

Configuration Examples for Wireshark

Configuration Examples for Wireshark

Example: Displaying a Brief Output from a .pcap File

You can display the output from a .pcap file by entering:

Switch# 

show monitor capture file bootflash:mycap.pcap

  1   0.000000   10.1.1.140 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
  2   1.000000   10.1.1.141 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
  3   2.000000   10.1.1.142 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
  4   3.000000   10.1.1.143 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
  5   4.000000   10.1.1.144 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
  6   5.000000   10.1.1.145 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
  7   6.000000   10.1.1.146 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
  8   7.000000   10.1.1.147 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
  9   8.000000   10.1.1.148 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 10   9.000000   10.1.1.149 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 11  10.000000   10.1.1.150 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 12  11.000000   10.1.1.151 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 13  12.000000   10.1.1.152 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 14  13.000000   10.1.1.153 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 15  14.000000   10.1.1.154 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 16  15.000000   10.1.1.155 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 17  16.000000   10.1.1.156 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 18  17.000000   10.1.1.157 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 19  18.000000   10.1.1.158 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 20  19.000000   10.1.1.159 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 21  20.000000   10.1.1.160 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 22  21.000000   10.1.1.161 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 23  22.000000   10.1.1.162 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 24  23.000000   10.1.1.163 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 25  24.000000   10.1.1.164 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 26  25.000000   10.1.1.165 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 27  26.000000   10.1.1.166 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 28  27.000000   10.1.1.167 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 29  28.000000   10.1.1.168 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 30  29.000000   10.1.1.169 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 31  30.000000   10.1.1.170 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 32  31.000000   10.1.1.171 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 33  32.000000   10.1.1.172 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 34  33.000000   10.1.1.173 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 35  34.000000   10.1.1.174 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 36  35.000000   10.1.1.175 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 37  36.000000   10.1.1.176 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 38  37.000000   10.1.1.177 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 39  38.000000   10.1.1.178 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 40  39.000000   10.1.1.179 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 41  40.000000   10.1.1.180 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 42  41.000000   10.1.1.181 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 43  42.000000   10.1.1.182 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 44  43.000000   10.1.1.183 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 45  44.000000   10.1.1.184 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 46  45.000000   10.1.1.185 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 47  46.000000   10.1.1.186 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 48  47.000000   10.1.1.187 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 49  48.000000   10.1.1.188 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 50  49.000000   10.1.1.189 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 51  50.000000   10.1.1.190 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 52  51.000000   10.1.1.191 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 53  52.000000   10.1.1.192 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 54  53.000000   10.1.1.193 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 55  54.000000   10.1.1.194 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 56  55.000000   10.1.1.195 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 57  56.000000   10.1.1.196 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 58  57.000000   10.1.1.197 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002
 59  58.000000   10.1.1.198 -> 20.1.1.2     UDP Source port: 20001  Destination port: 20002

Example: Displaying Detailed Output from a .pcap File

You can display the detailed .pcap file output by entering:

Summary of Contents for Catalyst 4500 Series







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Catalyst 4500 Series

Panasonic KX-UDS124 Important Information Manual preview
KX-UDS124
Brand: Panasonic Pages: 44
iDirect Evolution X3 Installation And Safety Manual preview
Evolution X3
Brand: iDirect Pages: 60
Zoom 4401F Specification Sheet preview
4401F
Brand: Zoom Pages: 2
Microtek MiniLink Operation Manual preview
MiniLink
Brand: Microtek Pages: 25
Starbridge Networks ADSL Ethernet & USB Combo Router Lynx L-510 User Manual preview
ADSL Ethernet & USB Combo Router Lynx L-510
Brand: Starbridge Networks Pages: 59
Alcatel-Lucent 1353 Brochure preview
1353
Brand: Alcatel-Lucent Pages: 12
LevelOne FSW-0512 Specification Sheet preview
FSW-0512
Brand: LevelOne Pages: 2
ICP DAS USA PDS-734 Quick Start Manual preview
PDS-734
Brand: ICP DAS USA Pages: 8
SMC Sierra Monitor FPC-N38 Startup Manual preview
FPC-N38
Brand: SMC Sierra Monitor Pages: 43
Tripp Lite N201-005-YW Specifications preview
N201-005-YW
Brand: Tripp Lite Pages: 2
WEIGL Nanotec Instruction Manual preview
Nanotec
Brand: WEIGL Pages: 6
Crestron HDMI Input Card DMC-HD Specifications preview
HDMI Input Card DMC-HD
Brand: Crestron Pages: 1
D-Link DSL-560I User Manual preview
DSL-560I
Brand: D-Link Pages: 74
NetApp AFF A400 Manual preview
AFF A400
Brand: NetApp Pages: 121
Lenovo px Series Quick Start Manual preview
px Series
Brand: Lenovo Pages: 44
Lenovo EMC2 px Series Quick Start Manual preview
EMC2 px Series
Brand: Lenovo Pages: 40
Lenovo LENOVOEMC PX4-300D Specifications preview
LENOVOEMC PX4-300D
Brand: Lenovo Pages: 4
Lenovo EZ Media & Backup Center User Manual preview
EZ Media & Backup Center
Brand: Lenovo Pages: 120

Brands by name

Popular brands

Load more brands