54-6
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 54 Auto Identity
Configuration Examples for Auto Identity
Configuring Auto Identity at an Interface Level
When you configure two interface templates, you must configure the
merge
keyword. If you do not, the
last configured template is used.
Configuration Examples for Auto Identity
•
Example: Configuring Auto Identity Globally, page 54-7
•
Example: Configuring Auto Identity at an Interface Level, page 54-7
Step 7
Switch(config-radius-server)#
key ipv4
{
0
string |
7
string} string
Specifies the authentication and encryption key for all RADIUS
communications between the device and the RADIUS server.
Note
This command is not a part of the global template, and
you must configure it.
Step 8
Switch(config-radius-server)#
end
Exits RADIUS server configuration mode and returns to privileged
EXEC mode.
Command or Action
Purpose
Command or Action
Purpose
Step 1
Switch#
enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
Switch#
configure terminal
Enters global configuration mode.
Step 3
Switch(config)#
interface
type number
Configures an interface and enters interface configuration mode.
Step 4
Switch(config-if)#
source template
{
AI_CLOSED_MODE
|
AI_LOW_IMPACT_MODE
|
AI_MONITOR_MODE
|
template-name
} [
merge
]
Configures a source template for the interface.
Step 5
Switch(config-if)#
source template
{
AI_CLOSED_MODE
|
AI_LOW_IMPACT_MODE
|
AI_MONITOR_MODE
|
template-name
} [
merge
]
(Optional) Configures a source template for the interface and
merges this template with the previously configured template.
•
When you configure two templates, if you do not configure
the
merge
keyword, the last configured template is used.
Step 6
Switch(config-if)#
switchport access vlan
vlan-id
Sets the VLAN when the interface is in access mode.
Step 7
Switch(config-if)#
switchport voice vlan
vlan-id
Configures a voice VLAN on a multiple VLAN access port.
Step 8
Repeat Steps 4, 6, and 7 on all interfaces that
must have the Auto Identity feature configured.
—
Step 9
Switch(config-if)#
end
Exits interface configuration mode and returns to privileged
EXEC mode.
Summary of Contents for Catalyst 4500 Series
Page 2: ......
Page 4: ......
Page 2086: ...Index IN 46 Software Configuration Guide Release IOS XE 3 9 0E and IOS 15 2 5 E ...