Cisco Catalyst 4500 Series, Software Configuration Manual

Page: 1636 / 2086

62-12
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 62 Configuring Network Security with ACLs
Layer 4 Operators in ACLs
Configuration Guidelines for Layer 4 Operations
When using Layer 4 operators, consider these guidelines:
•
Layer 4 operations are considered different if the operator or operand differ. For example, the
following ACL contains three different Layer 4 operations because gt 10 and gt 11 are considered
two different Layer 4 operations:
... gt 10 permit
... lt 9 deny
... gt 11 deny
Note
The eq operator can be used an unlimited number of times because eq does not use a Layer 4
operation in hardware.
•
Layer 4 operations are considered different if the same operator/operand couple applies once to a
source port and once to a destination port, as in the following example:
... Src gt 10....
... Dst gt 10
A more detailed example follows:
access-list 101
... (dst port) gt 10 permit
... (dst port) lt 9 deny
... (dst port) gt 11 deny
... (dst port) neq 6 permit
... (src port) neq 6 deny
... (dst port) gt 10 deny
access-list 102
... (dst port) gt 20 deny
... (src port) lt 9 deny
... (src port) range 11 13 deny
... (dst port) neq 6 permit
Access lists 101 and 102 use the following Layer 4 operations:
•
Access list 101 Layer 4 operations: 5
–
gt 10 permit and gt 10 deny both use the same operation because they are identical and both
operate on the destination port.
• Access list 102 Layer 4 operations: 4
•
Total Layer 4 operations: 8 (due to sharing between the two access lists)
– neq6 permit is shared between the two ACLs because they are identical and both operate on the
same destination port.
•
A description of the Layer 4 operations usage is as follows:
– Layer 4 operation 1 stores gt 10 permit and gt 10 deny from ACL 101
–
Layer 4 operation 2 stores lt 9 deny from ACL 101
– Layer 4 operation 3 stores gt 11 deny from ACL 101
–
Layer 4 operation 4 stores neg 6 permit from ACL 101 and 102
– Layer 4 operation 5 stores neg 6 deny from ACL 101
–
Layer 4 operation 6 stores gt 20 deny from ACL 102