3-32
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 3 Configuring the Switch for the First Time
Modifying the Supervisor Engine Startup Configuration
•
Boot the system from flash memory either automatically or manually
•
Copy the flash memory image to a network server using TFTP or RCP
For more information on flash memory, see this URL:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/configuration/notes/OL_2788.h
tml
Security Precautions
Note the following security precaution when loading from flash memory:
Caution
You can only change the system image stored in flash memory from privileged EXEC level on the
console terminal.
Configuring Flash Memory
To configure your switch to boot from flash memory, perform the following procedure. Refer to the
appropriate hardware installation and maintenance publication for complete instructions on installing
the hardware.
Step 1
Copy a system image to flash memory using TFTP, FTP, or through a VRF interface.
Refer to section “Copy Configuration Files from a Network Server to the Router” in chapter
“Managing Configuration Files”, of the “Managing Configuration Files Configuration Guide” at the
following URL:
Configure the system to boot automatically from the desired file in flash memory.
You might need to change the configuration register value. See the
Using the boot Command” section on page 3-28
, for more information on modifying the
configuration register.
Step 2
Save your configurations.
Step 3
Power cycle and reboot your system to verify that all is working as expected.
Controlling Environment Variables
Although the ROM monitor controls environment variables, you can create, modify, or view them with
certain commands. To create or modify the BOOT and BOOTLDR variables, use the
boot system
and
boot bootldr
global configuration commands, respectively. Refer to the “Specify the Startup System
Image in the Configuration File” section in the “Loading and Maintaining System Images and
Microcode” chapter of the
Configuration Fundamentals Configuration Guide
for details on setting the
BOOT environment variable.
Summary of Contents for Catalyst 4500 Series
Page 2: ......
Page 4: ......
Page 2086: ...Index IN 46 Software Configuration Guide Release IOS XE 3 9 0E and IOS 15 2 5 E ...
