Cisco Catalyst 4500 Series Software Configuration Manual Download

Page: 351 / 2086

6-39

Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex

Chapter 6 Programmability

Sample Configuration and Reference Information

Downloading http://example-httpserver-url.com/example_dmi_container.ova

% Total % Received % Xferd Average Speed Time Time Time Current

Dload Upload Total Spent Left Speed

100 125M 100 125M 0 0 24.3M 0 0:00:05 0:00:05 --:--:-- 19.1M

Continuing with IOS boot..

Nov 21 09:06:06 %IOSXE-3-PLATFORM: process kernel: [ 93.350890] mpc85xx_pci_err_probe:

Unable to requiest irq 0 for MPC85xx PCI err

Nov 21 09:06:06 %IOSXE-3-PLATFORM: process kernel: [ 93.361062]

mpc85xx_pcie_err_probe: Unable to requiest irq 0 for MPC85xx PCIe err

Loading gsbu64atomic as gdb64atomic

Loading pds_kc_flowcntl for kstack

loading kstack module

Loading container module

Failed to bring interface "eth1" up

Using 1 for MTS slot

Platform Manager: starting in standalone mode (active)

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

Rights clause at FAR sec. 52.227-19 and subparagraph

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software

(cat4500e-UNIVERSALK9-M), Version 03.09.01.E.179 EARLY DEPLOYMENT [PROD IMAGE]

ENGINEERING NOVA_WEEKLY BUILD, synced to V152_5_1_68_E1

Technical Support: http://www.cisco.com/techsupport

Compiled Sat 12-Nov-16 19:26 by sdcunha

licensed under the GNU General Public License ("GPL") Version 2.0. The

software code licensed under GPL Version 2.0 is free software that comes

with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such

GPL code under the terms of GPL Version 2.0.

(http://www.gnu.org/licenses/gpl-2.0.html) For more details, see the

documentation or "License Notice" file accompanying the IOS-XE software,

or the applicable URL provided on the flyer accompanying the IOS-XE

software.

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

[email protected].

Summary of Contents for Catalyst 4500 Series







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Catalyst 4500 Series

Reviews:

Related manuals for Catalyst 4500 Series

Brands by name

Popular brands

Cisco Catalyst 4500 Series, Software Configuration Manual

Search results

Summary of Contents for Catalyst 4500 Series

Reviews:

Related manuals for Catalyst 4500 Series

Brands by name

Popular brands