32-13
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 32 Configuring LLDP, LLDP-MED, and Location Service
Configuring LLDP and LLDP-MED, and Location Service
Use the
no
form of each command to return to the default setting.
This example shows how to configure civic location information on the switch:
Switch#
configure terminal
Switch(config)#
location civic-location identifier 1
Switch(config-civic)#
number 3550
Switch(config-civic)#
primary-road-name
"Cisco Way"
Switch(config-civic)#
city
"San Jose"
Switch(config-civic)#
state
CA
Switch(config-civic)#
building 19
Switch(config-civic)#
room C6
Switch(config-civic)#
county "Santa Clara"
Switch(config-civic)#
country US
Switch(config-civic)#
end
To enable location service on the switch, perform this task:
Note
Your switch must be running the cryptographic (encrypted) software image in order to enable the
location service feature. Your Cisco Mobility Service Engine (MSE) must be running Heitz 6.0 or later
software image to support wired location service
Step 5
Switch(config-if)#
location
{
additional-location-information
word |
civic-location-id
id
|
elin-location-id
id
}
Enters location information for an interface:
additional-location-information
—Specifies additional information
for a location or place.
civic-location-id
—Specifies global civic location information for an
interface.
elin-location-id
—Specifies emergency location information for an
interface.
id—
Specifies the ID for the civic location or the ELIN location. The
ID range is 1 to 4095.
word
—Specifies a word or phrase that provides additional location
information.
Step 6
Switch(config-if)#
end
Returns to privileged EXEC mode.
Step 7
Switch#
show location
Verifies the configuration.
Step 8
Switch#
copy running-config
startup-config
(Optional) Saves your entries in the configuration file.
Command
Purpose
Command
Purpose
Step 1
Switch#
configure terminal
Enters global configuration mode.
Step 2
Switch(config)#
nmsp enable
Enables the NMSP features on the switch.
Step 3
Switch(config)#
ip device tracking
Enables IP device tracking.
Summary of Contents for Catalyst 4500 Series
Page 2: ......
Page 4: ......
Page 2086: ...Index IN 46 Software Configuration Guide Release IOS XE 3 9 0E and IOS 15 2 5 E ...
