Cisco Catalyst 3000, Administration Manual

Page: 348 / 496

Description Setting
Click Automatic Setup to set the system settings from the
Cisco-provided .xls data configuration file. You can either upload
the Cisco-provided .xls data configuration file from your desktop
or from a USB flash drive. Values in the subsequent pages are loaded
with the information that you provide in the Cisco-provided .xls data
configuration file. If a value is not in the file, the system uses the
default value.
The Cisco-provided .xls data configuration file must be a Microsoft
Excel file (.xls), which you can obtain from
www.cisco.com
.
The system reads data from the .xls file, and you can confirm the
data on the wizard
Summary page.
The system cannot read the data if you have changed the
order of the settings in the file or changed the file
extension.
Caution
The data does not get added toCisco Business Edition 3000 until
after the server restarts at the end of the wizard. Cisco recommends
that after you restart the server, access the Cisco Business Edition
3000 Administrative Interface to determine whether configuration
data got added to the system; for example, if you add user and phone
data to the Cisco-provided .xls data configuration file, the Cisco
Business Edition 3000 Administrative Interface immediately displays
important information about phone and user insertion after you log
into the interface.
Automatic Setup
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
328 OL-27022-01