Cisco Catalyst 3000, Administration Manual

Page: 367 / 496

Description Field
Click Save to save your changes.
A progress bar indicates the status of the site configuration.
If you refresh or open a new browser window to access the
Administrative interface while the site configuration is being
updated, a message displays that the system update is currently
in progress and the administrative interface will not be
available until the update is completed.
If there is a failure while updating the site, the system restarts
to recover. The failure indicates the problem with the system
configuration.
Cisco recommends that you contact the Cisco
Technical Assistance Center for assistance in case of
a failure.
Note
Save
Click Reset to discard your changes and display the saved
data.
Reset
Click OK to save your settings.
A progress bar indicates the status of the site configuration.
If you refresh or open a new browser to access the
Administrative Interface while the site is configured, a
message appears indicating that the system update is currently
in progress and the administrative interface will be unavailable
until the update completes.
If an error occurs while configuring the site, the system restarts
to recover. The failure indicates the problem with the system
configuration.
Cisco recommends that you contact the Cisco
Technical Assistance Center for assistance.
Note
OK
Click Cancel to cancel the configuration. Cancel
Configure Remote User Site
This section describes how to configure a remote user site. Remote user site represents a virtual location used
to place users/teleworkers that do not work at the central site or any remote site.
The remote user site uses the Time zone and Local Area Code(s) of the central site. All the phones in the
remote user site will display the system time zone. To place PSTN calls outside the central site, prefix the
long distance dial code. In countries that have toll bypass regulation, ensure that the PSTN calls from remote
user site adheres to their country regulation. The following table describes the settings for a remote user.
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
OL-27022-01 347
Configure Remote User Site