Cisco Catalyst 3000 Administration Manual Download Page 156

Page: 156 / 496

This will help configure the gateway through Cisco IOS CLI.

Step 8

As part of editing your gateway configuration, older configuration will be erased first. Copy and paste the
command

erase startup-config t

o the gateway console.

Type Return to confirm erasing configuration at prompt:

Erasing the nvram filesystem will remove all configuration files! Continue?

[confirm]

Step 9

Copy and paste the command

reload

to startup the gateway fresh.

If prompted to save current system configuration, Type 'Yes' at prompt:

System configuration has been modified. Save? [yes/no]: yes

Type Return to proceed with reload at prompt:

Proceed with reload? [confirm]

Wait for a few minutes while the gateway reloads.

Step 10

When the gateway comes back up, enter the following answer when the system message appears on the
gateway.

--- System Configuration Dialog ---

At any point you may enter a question mark '?' for help.

Use ctrl-c to abort configuration dialog at any prompt

Default settings are in square brackets '[]'.

Would you like to enter the initial configuration dialog? [yes/no]: no

Step 11

If prompted to terminate auto install, press

Return

and continue with manual configuration:

Would you like to terminate autoinstall? [yes] Return

Several messages are displayed, ending with a line similar to the

following:

...

Compiled <date> <time> by <person>

Step 12

Press

Return

to bring up the Router> prompt.

...

flashfs[4]: Initialization complete.

Router>

Step 13

Type enable to enter privileged EXEC mode:

Router> enable

Router#

Step 14

Copy and paste rest of the commands onto the gateway prompt, line by line, to complete your gateway setup.

Step 15

At the end of this configuration, Telnet access password is set to changeme. To change this, type the following
at the gateway prompt:
Router

# configure terminal

Router(config)

# line vty 0 4

Router(config-line)

# password <Your new Telnet password>

Administration Guide for Cisco Business Edition 3000, Release 8.6(4)

136

OL-27022-01

Editing the Gateway Configuration

Summary of Contents for Catalyst 3000

















































































































































































































































































































































































































































































































Search results

Summary of Contents for Catalyst 3000

Reviews:

Related manuals for Catalyst 3000

Brands by name

Popular brands

Cisco Catalyst 3000, Administration Manual

Search results

Summary of Contents for Catalyst 3000

Reviews:

Related manuals for Catalyst 3000

Brands by name

Popular brands