Cisco Catalyst 3000, Administration Manual

Page: 287 / 496

Description Setting
Any outbound call on a gateway can send directory number
information. Select which directory number is sent.
Select one of the following options:
• Originator—Send the directory number of the calling device.
• First Redirect Number—Send the directory number of the
redirecting device.
• Last Redirect Number—Send the directory number of the last
device to redirect the call.
• First Redirect Number (External)—Send the directory number
of the first redirecting device with the external phone mask
applied.
• Last Redirect Number (External)—Send the directory number
of the last redirecting device with the external phone mask
applied.
Calling Party Selection
Select the format for the number type in called party directory
numbers.
Cisco Business Edition 3000 sets the called directory number (DN)
type. Cisco recommends that you do not change the default value
unless you have advanced experience with dialing plans such as
NANP or the European dialing plan. You may need to change the
default in Europe because Cisco Business Edition 3000 does not
recognize European national dialing patterns. You can also change
this setting when you are connecting to a PBX that expects the called
directory number to be encoded to a non-national type numbering
plan.
Select one of the following options:
• Cisco Business Edition 3000—Use when the Cisco Business
Edition 3000 sets the directory number type.
• Unknown—Use when the dialing plan is unknown.
• National—Use when you are dialing within the dialing plan
for your country.
• International—Use when you are dialing outside the dialing
plan for your country.
• Subscriber—Use when you are dialing a subscriber by using
a shortened subscriber number.
Called Party IE Type Unknown
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
OL-27022-01 267
Connection Settings