Cisco Catalyst 3000 Administration Manual Download Page 463

Page: 463 / 496

Reseller (VAR), or if you are the Value Added Reseller, contact the Cisco Technical Assistance Center
(TAC).

The system has experienced an error with voicemail and auto attendant
services and must be restarted

Problem

When the caller attempted to use voicemail, an error occurred.

•

Solution

Ask the caller to try again.

• If the issue occurs again, perform the following tasks:

◦ Enable tracing on the Diagnostics page (

Monitoring

Diagnostics

◦ Attempt to reproduce the issue.

◦ Generate a log file on the Diagnostics page, and download the log file to your PC.

◦ Send the log file to the technical support team; for example, contact your Value Added Reseller

(VAR), or if you are the Value Added Reseller, contact the Cisco Technical Assistance Center
(TAC).

How do I Enable or disable T1/E1 and ECAN Statistics Logging?

Problem

When I Enable or disable the T1/E1 and ECAN statistics logging in the Administrative Interface, if

the alarm is activated, the T1/E1 status does not increase.

The T1/E1 and ECAN statistics is activated based on the following:

• Enable logging on the Administrative Interface

• When the error count related to T1/E1 increases, the T1/E1 statistics is logged for every 30 seconds in

FGASyslog.

• When there is no error count related to T1/E1, the T1/E1 statistics is logged for every 2 minutes

FGASyslog.

• ECAN is collected for every 1 minute and it is collected on all active channels only.

• The ECAN Logging Stops if FGA resets.

Solution

To Enable T1/E1 and ECAN statistics perform the following steps:

• Click

Enable Logging

on the

Diagnostics

page (

Monitoring

Diagnostics

). The T1/E1 and ECAN

statistics logging is also enabled.

• Click the

Generate Log File

on the

Diagnostics

page, and download the file to your PC to view the

FGASyslog file, which contains the T1/E1 and ECAN statistics logs.

• To Disable T1/E1 and ECAN statistics click

Disable Logging

on the

Diagnostics

page (

Monitoring

Diagnostics

). The T1/E1 and ECAN statistics logging is also disabled.

Administration Guide for Cisco Business Edition 3000, Release 8.6(4)

OL-27022-01

443

The system has experienced an error with voicemail and auto attendant services and must be restarted

Summary of Contents for Catalyst 3000

















































































































































































































































































































































































































































































































Search results

Summary of Contents for Catalyst 3000

Reviews:

Related manuals for Catalyst 3000

Brands by name

Popular brands

Cisco Catalyst 3000, Administration Manual

Search results

Summary of Contents for Catalyst 3000

Reviews:

Related manuals for Catalyst 3000

Brands by name

Popular brands