Cisco Catalyst 3000 Administration Manual Download Page 45

Page: 45 / 496

In the example in the previous illustration,

tftp://192.168.2.251/spa$MA.cnf.xml

is the TFTP

protocol where

192.168.2.251

is the IP address of the Cisco Business Edition 3000.

SPA8800 treats $MA as a placeholder for its own MAC address. $MA must be entered in capital
letters. For more information, see

http://www.cisco.com/en/US/docs/voice_ip_comm/csbpvga/ata/

provisioning/guide/Cisco_Small_Business_IP_Telephony_Provisioning_Guide.pdf

Note

Only TFTP is supported in the current
release.

Note

Step 6

Click the

Submit All Changes

button.

Step 7

Reboot the SPA8800 now.
This can be done by unplugging the power cord for the SPA8800 and plugging it back in.

SPA8800 Feature Codes

The following table lists the feature codes that are supported for SPA8800.

Table 2: Supported feature codes

Code number

Feature

*07

Call Redial

*66

Call Back

*86

Call Back Deactivate Code

*56

Call Waiting

*57

Call Waiting Deactivate Code

*71

Call Waiting Per Call Act Code

*70

Call Waiting Per Call Deact Code

*69

Call Return

*84

Attn-Transfer

*85

Conference

SPA8800 Limitations

The Do Not Disturb (DND) setting cannot be configured for SPA8800 analog phones.

Music On Hold (MOH) is not supported on the SPA8800 analog phones.

Blind Transfer is not supported on the SPA8800 analog phones.

Call Forwarding must be set from the Cisco Business Edition 3000 and not from the SPA8800.

Administration Guide for Cisco Business Edition 3000, Release 8.6(4)

OL-27022-01

Components of the Cisco Business Edition 3000 System

Summary of Contents for Catalyst 3000

















































































































































































































































































































































































































































































































Search results

Summary of Contents for Catalyst 3000

Reviews:

Brands by name

Popular brands

Cisco Catalyst 3000, Administration Manual

Search results

Summary of Contents for Catalyst 3000

Reviews:

Brands by name

Popular brands