Cisco Catalyst 3000, Administration Manual

Page: 181 / 496

work. Most of the Cisco Unified Communications Manager data that is included in the tar file does not
display in the administrative interfaces for Cisco Business Edition 3000.
• You can use the tar file to import the data to a Cisco Unified Communications Manager Business Edition
5000 server. When you import, you use the Bulk Administration Tool that is automatically installed on
the Cisco Unified Communications Manager Business Edition 5000 server. Bulk Administration displays
as a menu option in the Cisco Unified Communications Manager Administration.
Cisco recommends that you do not change any data in the tar file, including the order of settings, if you
plan to import the data to a Cisco Unified Communications Manager Business Edition 5000 server. If you
need to update the configuration, Cisco recommends that you update the settings in the administrative
interfaces in Cisco Unified Communications Manager Business Edition 5000 after the import is completed. Tip
• If you import the tar file, the Cisco Unified Communications Manager Business Edition 5000 server
must run the exact same version of call-processing software as the Cisco Business Edition 3000 server
when you ran the export; for example, if the Cisco Business Edition 3000 server runs 8.5(1) when you
export the data, the Cisco Unified Communications Manager Business Edition 5000 server must run
8.5(1) when you import the data.
• If you import the tar file to a Cisco Unified Communications Manager Business Edition 5000 server,
you must configure Cisco Unity Connection Administration on the Cisco Unified Communications
Manager Business Edition 5000 server because configuration export does not export Cisco Unity
Connection data.
The following procedure describes how to export your data from Cisco Business Edition 3000 and import it
to Cisco Unified Communications Manager Business Edition 5000.
Procedure
Step 1
Run a backup, as described in the Backing Up Your Data, on page 157 .
Step 2 Export your data through the Configuration Export page.
Select
Maintenance > Configuration Export in the Cisco Business Edition 3000 Administrative Interface.
Cisco recommends that you do not make any changes to the tar file after you complete the export. Tip
Step 3 If you plan to import the data to a Cisco Unified Communications Manager Business Edition 5000 server,
install Cisco Unified Communications Manager Business Edition 5000 on the Cisco Unified Communications
Manager Business Edition 5000 server.
Refer to
Installing Cisco Unified Communications Manager Business Edition 5000 .
Step 4 If necessary, upgrade Cisco Unified Communications Manager Business Edition 5000 to the exact same
version that is running on the Cisco Business Edition 3000 server.
For upgrade information, refer to
Cisco Unified Communications Operating System Administration Guide .
Step 5 To import the Cisco Business Edition 3000 data to a Cisco Unified Communications Manager Business Edition
5000 server, access the Bulk Administration Tool that is automatically available on the Cisco Unified
Communications Manager Business Edition 5000 server after installation.
Refer to
Cisco Unified Communications Manager Bulk Administration Guide .
Step 6 After the import of data is complete, update the configuration in the GUIs on the Cisco Unified Communications
Manager Business Edition 5000 server.
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
OL-27022-01 161
Exporting Your Data and Importing to Cisco Unified Communications Manager Business Edition 5000