Cisco Catalyst 3000, Administration Manual

Page: 374 / 496

Description Field
Click OK to save your settings.
A progress bar indicates the status of the site configuration.
If you refresh or open a new browser to access the
Administrative Interface while the site is configured, a
message appears indicating that the system update is currently
in progress and the administrative interface will be
unavailable until the update completes.
If an error occurs while configuring the site, the system
restarts to recover. The failure indicates the problem with the
system configuration.
Cisco recommends that you contact the Cisco
Technical Assistance Center for assistance.
Note
OK
Click Cancel to cancel the configuration. Cancel
Configuring Logical Partitioning
Some countries have regulations on PSTN access to prevent toll bypass when PSTN networks are bridged
with data networks; for example, India. In Cisco Business Edition 3000, you can control how phones in
different sites participate during PSTN calls. You can configure Logical Partitioning on Cisco Business Edition
3000 if installed in countries enforcing the Telecom Regulations.
The following table describes the settings that display on the Edit Logical Partitioning page.
Table 85: Settings on Edit Logical Partitioning page
Description Field
PSTN Access Restrictions
Choose this to prevent a phone in a remote site
participating in a call happening between phone(s) in
the local site and PSTN (using the gateway of the
local site). Default (Local Site Access only)
In the grid showing all your sites, check the check
boxes to allow PSTN access between a pair of sites.
This setting is bidirectional and allows phones from
the selected pair of sites to participate in the same call
connected to PSTN.
When you add a new site, the Add Site page
displays all the sites. You can select the
site(s) to which phones from the selected
site(s) and the new site can participate in the
same call connected to PSTN.
Note
Custom (Choose Allowed Sites)
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
354 OL-27022-01
Configuring Logical Partitioning