Cisco Catalyst 3000, Administration Manual

Page: 225 / 496

C H A P T E R
20
Connection Groups
The Connection Groups page ( Connections > Connection Groups ) allows you to configure and manage
connection groups to route PSTN calls on the Cisco Business Edition 3000.
Table 37: Settings on the Connection Groups Page, on page 205 describes the settings on the Connection
Groups page ( Connections > Connection Groups ). Click Connection Groups to view the configured
connection groups for use with the Cisco Business Edition 3000.
Table 37: Settings on the Connection Groups Page
Description Settings
Specifies the unique name of the connection group.
This name cannot exceed 47 characters and can contain only
alphanumeric characters, periods (.), underscores (_), hyphens
(-), or space ( ).
By default, there are 2 system-generated connection groups:
• All Connections—A system-generated connection
group, which includes all the gateways in the system,
listed in the order of SIP connections, MGCP
connections, PRI connections, CAS connections and
SPA analog gateways.
• <<Sitename>> Connections—A system-generated
connection group formed after migration to Release
8.6.4, which includes all the gateways on that site before
migration.
By default, each site uses its respective connection
group. When a new site is created, the All Connections
connection group is created by the system and will be
used as a default connection group.
Name
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
OL-27022-01 205