Cisco Catalyst 3000, Administration Manual

Page: 70 / 496

By provisioning the Calling Party Transformations feature for a SIP Trunk, the SIP dialogs established as
part of outbound SIP Trunk calls always use the transformation for upsizing the number sent in P-Asserted
ID or Remote Party ID headers of an outbound SIP message.
For the calling party transformation to function correctly, ensure that the External Caller ID is defined for
the user. You can edit the External Caller ID on
Users/Phones > Users > Edit User > General page .
Note
Connected Party Transformation
The backward direction SIP messages namely 183, 200 Ok or mid-call UPDATE/INVITE messages from the
connected party SIP trunk on Cisco Business Edition 3000 carry the URI identity containing a number in user
portion.
By default, the Cisco Business Edition 3000 sends configured extension number only, while the expected
number for inter-operability with the SIP service provider is the DID or full number (for example: Office
code + Subscriber code).
To send the full number (DID) on SIP trunk, the Cisco Business Edition 3000 preconfigures the Connected
Party Transformation on SIP trunk used to connect to the session border element. By provisioning the Connected
Party Transformation feature for a SIP trunk, the SIP dialogs established as part of inbound SIP trunk calls
always use the transformation for upsizing the number sent in PAI/RPID headers of an outbound SIP message.
For the connected party transformation to function correctly, ensure that the External Caller ID is defined
for the user. You can edit the External Caller ID on
Users/Phones > Users > Edit User > General page .
Note
Attendant Group
The Attendant Group page allows you to add or remove attendant console users who will be associated with
all the phones in the phone list of Cisco Business Edition 3000 (choose
Users/Phones > Attendant Group ).
You can add until ten users to the Attendant Group. The system displays an error message when you click to
add more than ten users.
You must have administrator account, browser access, and Internet access to add or remove users.
Attendant Group requires an additional enhanced user license for each group member. If the number of
licenses is insufficient, a new user will not get associated to the Attendant Group.
Note
Attendant Group has an Available list of users, which displays all the users in the Cisco Business Edition
3000 who are not associated with Attendant Group, and a Selected list, which displays all users who are
associated to Attendant Group. You can move users from Available to Selected to associate a user to Attendant
Group.
After adding a user to the Selected list you must save the user in the Selected list. You can also remove users
from the Selected list. The users removed from the Selected list are moved to the Available list. For more
information, see (
Setting Up Attendant Group, on page 151 and Attendant Group Settings, on page 173 ).
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
50 OL-27022-01
Common Configuration Concepts in Cisco Business Edition 3000