manualshive.com logo in svg

Chevrolet 2002 Astro, Owner'S Manual, Page: 78 / 400

Share
Download
Chevrolet 2002 Astro Owner'S Manual Download Page 78

2-5

This vehicle has one
double

-

sided key for the

ignition and door locks. It
will fit with either side up.

When a new vehicle is delivered, the dealer provides the
owner with a pair of identical keys and a bar

-

coded tag.

The bar

-

coded tag has a code on it that tells your dealer

or a qualified locksmith how to make extra keys. Keep
this tag in a safe place. If you lose your keys, you’ll be
able to have new ones made easily using this tag.

NOTICE:

Your vehicle has a number of new features that
can help prevent theft. But you can have a lot 
of trouble getting into your vehicle if you ever
lock your keys inside. You may even have to
damage your vehicle to get in. So be sure you
have extra keys.

If you ever do get locked out of your vehicle, call GM
Roadside Assistance Center. See “Roadside Assistance”
in the index.

Summary of Contents for 2002 Astro

















































































































































































































































































































































































































Reviews:

No comments