manualshive.com logo in svg

Chevrolet 2002 Astro, Owner'S Manual, Page: 50 / 400

Share
Download
Chevrolet 2002 Astro Owner'S Manual Download Page 50

1-43

CAUTION: (Continued)

For example, in a crash at only 25 mph (40 km/h),
a 12

-

lb. (5.5 kg) baby will suddenly become a

240

-

lb. (110 kg) force on a person’s arms. A baby

should be secured in an appropriate restraint.

CAUTION:

Children who are up against, or very close to, 
any air bag when it inflates can be seriously
injured or killed. Air bags plus lap

-

shoulder belts

offer outstanding protection for adults and older
children, but not for young children and infants.
Neither the vehicle’s safety belt system nor its air
bag system is designed for them. Young children
and infants need the protection that a child
restraint system can provide.

Summary of Contents for 2002 Astro

















































































































































































































































































































































































































Reviews:

No comments