manualshive.com logo in svg

Chevrolet 2002 Astro, Owner'S Manual, Page: 297 / 400

Share
Download
Chevrolet 2002 Astro Owner'S Manual Download Page 297

6-37

NOTICE:

D Using the wrong fluid can badly damage

brake system parts. For example, just a few
drops of mineral

-

based oil, such as engine

oil, in your brake system can damage brake
system parts so badly that they’ll have to 
be replaced. Don’t let someone put in the
wrong kind of fluid.

D If you spill brake fluid on your vehicle’s

painted surfaces, the paint finish can be
damaged. Be careful not to spill brake 
fluid on your vehicle. If you do, wash it 
off immediately. See “Appearance Care” 
in the Index.

Brake Wear

Your vehicle has front disc brakes and rear drum brakes.

Disc brake pads have built

-

in wear indicators that make 

a high

-

pitched warning sound when the brake pads are

worn and new pads are needed. The sound may come 
and go or be heard all the time your vehicle is moving
(except when you are pushing on the brake pedal firmly).

CAUTION:

The brake wear warning sound means that soon
your brakes won’t work well. That could lead to
an accident. When you hear the brake wear
warning sound, have your vehicle serviced.

NOTICE:

Continuing to drive with worn

-

out brake pads

could result in costly brake repair.

Summary of Contents for 2002 Astro

















































































































































































































































































































































































































Reviews:

No comments