manualshive.com logo in svg

Chevrolet 2002 Astro, Owner'S Manual, Page: 259 / 400

Share
Download
Chevrolet 2002 Astro Owner'S Manual Download Page 259

5-32

NOTICE:

When the compact spare is installed, don’t take
your vehicle through an automatic car wash with
guide rails. The compact spare can get caught on
the rails. That can damage the tire and wheel,
and maybe other parts of your vehicle.

Don’t use your compact spare on other vehicles.

And don’t mix your compact spare tire or wheel with
other wheels or tires. They won’t fit. Keep your spare
tire and its wheel together.

NOTICE:

Tire chains won’t fit your compact spare. Using
them can damage your vehicle and can damage
the chains too. Don’t use tire chains on your
compact spare.

Summary of Contents for 2002 Astro

















































































































































































































































































































































































































Reviews:

No comments