manualshive.com logo in svg

Chevrolet 2002 Astro, Owner'S Manual, Page: 274 / 400

Share
Download
Chevrolet 2002 Astro Owner'S Manual Download Page 274

6-14

What Kind of Engine Oil to Use

Oils recommended for your vehicle can be identified by
looking for the starburst symbol.

This symbol indicates that the oil has been certified by
the American Petroleum Institute (API). Do not use any
oil which does not carry this starburst symbol.

If you change your own oil,
be sure you use oil that 
has the starburst symbol 
on the front of the oil
container. If you have your
oil changed for you, be sure
the oil put into your engine
is American Petroleum
Institute certified for
gasoline engines.

You should also use the proper viscosity oil for your
vehicle, as shown in the following chart:

Summary of Contents for 2002 Astro

















































































































































































































































































































































































































Reviews:

No comments