manualshive.com logo in svg

Chevrolet 2002 Astro, Owner'S Manual, Page: 141 / 400

Share
Download
Chevrolet 2002 Astro Owner'S Manual Download Page 141

2-68

Engine Coolant Temperature Gage

This gage shows the 
engine coolant temperature.
If the gage pointer moves to
the red area, your engine is
too hot!

It means that your engine coolant has overheated. If you
have been operating your vehicle under normal driving
conditions, you should pull off the road, stop your
vehicle and turn off the engine as soon as possible.

See “Engine Overheating” in the Index.

Malfunction Indicator Lamp (Service
Engine Soon Light in the United States 
or Check Engine Light in Canada)

United States

Canada

Your vehicle is equipped with a computer which
monitors operation of the fuel, ignition and emission
control systems.

Summary of Contents for 2002 Astro

















































































































































































































































































































































































































Reviews:

No comments