manualshive.com logo in svg

Chevrolet 2002 Astro, Owner'S Manual, Page: 63 / 400

Share
Download
Chevrolet 2002 Astro Owner'S Manual Download Page 63

1-56

3. Buckle the belt. Make sure the release button is

positioned so you would be able to unbuckle the
safety belt quickly if you ever had to.

4. To tighten the belt, pull up on the shoulder belt while

you push down on the child restraint. If you’re using
a forward

-

facing child restraint, you may find it

helpful to use your knee to push down on the child
restraint as you tighten the belt.

5. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, just unbuckle the vehicle’s
safety belt and let it go back all the way. The safety belt
will move freely again and be ready to work for an adult
or larger child passenger.

Summary of Contents for 2002 Astro

















































































































































































































































































































































































































Reviews:

No comments