manualshive.com logo in svg

Chevrolet 2002 Astro, Owner'S Manual, Page: 125 / 400

Share
Download
Chevrolet 2002 Astro Owner'S Manual Download Page 125

2-52

Variance is the difference between magnetic north and
geographic north. In some areas, the difference between
the two can be great enough to cause false compass
readings. If this happens, follow these instructions to set
the variance for your particular location:

1. Find your location on the zone map. Record your

zone number.

2. Press and hold both the MODE and the US/MET

buttons in the COMP/TEMP mode.

3. After five seconds, the compass will acknowledge

the variation mode by displaying the current zone
number. When it does, release both buttons.

4. Press US/MET until your zone number appears on

the display.

5. Press MODE to enter your zone number. Your

variance is now set and the display will return to the
COMP/TEMP mode.

Summary of Contents for 2002 Astro

















































































































































































































































































































































































































Reviews:

No comments