manualshive.com logo in svg

Chevrolet 2002 Astro, Owner'S Manual, Page: 349 / 400

Share
Download
Chevrolet 2002 Astro Owner'S Manual Download Page 349

Short Trip/City Scheduled Maintenance

7-15

j Change automatic transmission fluid and filter if the vehicle is mainly driven

under one or more of these conditions:

– In heavy city traffic where the outside temperature regularly 

reaches 90

_F (32_C) or higher.

– In hilly or mountainous terrain.
– When doing frequent trailer towing.
– Uses such as found in taxi, police or delivery service.

If you do not use your vehicle under any of these conditions, change the fluid
and filter every 50,000 miles (83 000 km).

j Rotate tires. See “Tire Inspection and Rotation” in the Index for proper

rotation pattern and additional information. (See fo.)

Summary of Contents for 2002 Astro

















































































































































































































































































































































































































Reviews:

No comments