manualshive.com logo in svg

Chevrolet 2002 Astro, Owner'S Manual, Page: 126 / 400

Share
Download
Chevrolet 2002 Astro Owner'S Manual Download Page 126

2-53

TRIP: Once in the TRIP mode, pressing the 
MODE button will take you through the following 
TRIP functions:
D AVG ECON (Average Economy): The average fuel

economy since the last reset is displayed.

D INST ECON (Instantaneous Economy):

Instantaneous fuel economy for the last second of
driving is displayed.

D RANGE: The display indicates the estimated

distance that can be travelled with the remaining fuel
in the tank, based on the fuel economy for the last
few hours of driving.

D FUEL USED: The fuel used since the last reset 

is displayed.

D AVG SPEED (Average Speed): The average speed

since the last reset is displayed.

To reset the trip computer, press the MODE and
US/MET buttons simultaneously for at least two
seconds. All functions will be displayed briefly once 
the system is reset. Reset can only be performed in the
AVG ECON, FUEL USED and AVG SPEED modes.
All three modes are reset simultaneously.

Sunglasses Storage Compartment

The overhead console has a sunglasses storage
compartment.

Summary of Contents for 2002 Astro

















































































































































































































































































































































































































Reviews:

No comments