manualshive.com logo in svg

Chevrolet 2002 Astro, Owner'S Manual, Page: 100 / 400

Share
Download
Chevrolet 2002 Astro Owner'S Manual Download Page 100

2-27

NOTICE:

Driving with the parking brake on can cause
your rear brakes to overheat. You may have to
replace them, and you could also damage other
parts of your vehicle.

If you are towing a trailer and are parking on a hill, see
“Towing a Trailer” in the Index. That section shows
what to do first to keep the trailer from moving.

Shifting Into PARK (P)

CAUTION:

It can be dangerous to get out of your vehicle if
the shift lever is not fully in PARK (P) with the
parking brake firmly set. Your vehicle can roll. 
If you have left the engine running, the vehicle
can move suddenly. You or others could be
injured. To be sure your vehicle won’t move, even
when you’re on fairly level ground, use the steps
that follow. If you’re pulling a trailer, see
“Towing a Trailer” in the Index.

1. Hold the brake pedal down with your right foot and

set the parking brake.

Summary of Contents for 2002 Astro

















































































































































































































































































































































































































Reviews:

No comments