manualshive.com logo in svg

Chevrolet 2002 Astro, Owner'S Manual, Page: 106 / 400

Share
Download
Chevrolet 2002 Astro Owner'S Manual Download Page 106

2-33

Tilt Wheel (If Equipped)

A tilt steering wheel allows you to adjust the steering
wheel before you drive. You can also raise it to the
highest level to give your legs more room when you exit
and enter the vehicle.

The lever that allows you to tilt the steering wheel is
located on the left side of the steering column.

To tilt the wheel, hold the steering wheel and pull the
lever. Move the steering wheel to a comfortable level,
then release the lever to lock the wheel in place.

Turn Signal/Multifunction Lever

The lever on the driver’s side of the steering column
includes the following:
D Turn and Lane Change Signals
D Headlamp High/Low

-

Beam Changer

D Flash

-

to

-

Pass

D Windshield Wipers
D Windshield Washer
D Cruise Control (Option)
For information on the exterior lamps, see ”Exterior
Lamps” later in this section.

Summary of Contents for 2002 Astro

















































































































































































































































































































































































































Reviews:

No comments