Chevrolet 2002 Astro Owner'S Manual Download Page 243

Page: 243 / 400

5-16

6. Start the engine and let it run until you can feel the

upper radiator hose getting hot. Watch out for the
engine cooling fan.

7. By this time, the coolant level inside the radiator

filler neck may be lower. If the level is lower, add
more of the proper DEX

COOL

coolant mixture

through the filler neck until the level reaches the
base of the filler neck.

8. Then replace the

pressure cap. At any
time during this
procedure if coolant
begins to flow out of
the filler neck, reinstall
the pressure cap.

Be sure the arrow on the pressure cap lines up like this.

Summary of Contents for 2002 Astro
















































































































































































































































































































































































































Search results

Summary of Contents for 2002 Astro

Reviews:

Chevrolet 2002 Astro, Owner'S Manual, Page: 243 / 400

Search results

Summary of Contents for 2002 Astro

Reviews: