manualshive.com logo in svg

Chevrolet 2002 Astro, Owner'S Manual, Page: 12 / 400

Share
Download
Chevrolet 2002 Astro Owner'S Manual Download Page 12

1-5

CAUTION:

Sitting in a reclined position when your vehicle is
in motion can be dangerous. Even if you buckle
up, your safety belts can’t do their job when
you’re reclined like this.

The shoulder belt can’t do its job because it
won’t be against your body. Instead, it will be 
in front of you. In a crash you could go into it,
receiving neck or other injuries.

The lap belt can’t do its job either. In a crash the
belt could go up over your abdomen. The belt
forces would be there, not at your pelvic bones.
This could cause serious internal injuries.

For proper protection when the vehicle is in
motion, have the seatback upright. Then sit 
well back in the seat and wear your safety 
belt properly.

Head Restraints

Head restraints are fixed on some models and adjustable
on others. Adjust your head restraint so that the top of
the restraint is closest to the top of your head. This
position reduces the chance of a neck injury in a crash.

Summary of Contents for 2002 Astro

















































































































































































































































































































































































































Reviews:

No comments