manualshive.com logo in svg

Chevrolet 2002 Astro, Owner'S Manual, Page: 238 / 400

Share
Download
Chevrolet 2002 Astro Owner'S Manual Download Page 238

5-11

CAUTION:

Heater and radiator hoses, and other engine
parts, can be very hot. Don’t touch them. If you
do, you can be burned.

Don’t run the engine if there is a leak. If you run
the engine, it could lose all coolant. That could
cause an engine fire, and you could be burned.
Get any leak fixed before you drive the vehicle.

If there seems to be no leak, start the engine again. 
The engine cooling fan speed should increase when idle
speed is doubled by pushing the accelerator pedal down.
If it doesn’t, your vehicle needs service. Turn off 
the engine.

NOTICE:

Engine damage from running your engine
without coolant isn’t covered by your warranty.

NOTICE:

When adding coolant, it is important that you 
use only DEX

-

COOL

R

 (silicate

-

free) coolant.

If coolant other than DEX

-

COOL is added to 

the system, premature engine, heater core or
radiator corrosion may result. In addition, the
engine coolant will require change sooner 

--

 at

30,000 miles (50 000 km) or 24 months,
whichever occurs first. Damage caused by the 
use of coolant other than DEX

-

COOL

R

 is not

covered by your new vehicle warranty.

Summary of Contents for 2002 Astro

















































































































































































































































































































































































































Reviews:

No comments