manualshive.com logo in svg

Chevrolet 2002 Astro, Owner'S Manual, Page: 123 / 400

Share
Download
Chevrolet 2002 Astro Owner'S Manual Download Page 123

2-50

The pegs inside the
compartment door are
used to make sure 
the button on the
compartment door 
will contact the control
button on the garage
door opener.

5. Add one peg at a time until the garage door opener

operates with the compartment door closed when
you press the button.

6. Now, with the

compartment door
closed, press the button
again to make sure the
garage door opener
operates properly.

With the garage door opener positioned properly and 
the right number of pegs in place, you should only 
have to press the button slightly to operate the opener.
Adjust the position of the garage door opener and 
add or remove pegs as needed, until the opener 
operates properly.

Your vehicle may be equipped with a HomeLink

R

Transmitter. For more information, see “HomeLink

R

Transmitter” in the Index.

Summary of Contents for 2002 Astro

















































































































































































































































































































































































































Reviews:

No comments