Chevrolet 2002 Astro Owner'S Manual Download Page 48 | Manualshive

Page: 48 / 400

Chevrolet 2002 Astro Owner'S Manual Download Page 48

1-41

Lap Belt

If your vehicle has rear bench seats, someone can sit in
the center positions.

When you sit in a center seating position, you have a
lap safety belt, which has no retractor. To make the belt
longer, tilt the latch plate and pull it along the belt.

To make the belt shorter, pull its free end as shown until
the belt is snug.

Buckle, position and release it the same way as the lap
part of a lap

-

shoulder belt. If the belt isn’t long enough,

see “Safety Belt Extender” at the end of this section.

Make sure the release button on the buckle is positioned
so you would be able to unbuckle the safety belt quickly
if you ever had to.

«
...
46
47
48
49
50
...
»

Summary of Contents for 2002 Astro

















































































































































































































































































































































































































Reviews:

No comments