manualshive.com logo in svg

Chevrolet 2002 Astro, Owner'S Manual, Page: 111 / 400

Share
Download
Chevrolet 2002 Astro Owner'S Manual Download Page 111

2-38

Cruise Control (Option)

With cruise control, you can maintain a speed of about
25 mph (40 km/h) or more without keeping your foot 
on the accelerator. This can really help on long trips.
Cruise control does not work at speeds below about 
25 mph (40 km/h).

When you apply your brakes, the cruise control 
shuts off.

CAUTION:

D Cruise control can be dangerous where 

you can’t drive safely at a steady speed. 
So, don’t use your cruise control on
winding roads or in heavy traffic.

D Cruise control can be dangerous on

slippery roads. On such roads, fast changes
in tire traction can cause needless wheel
spinning, and you could lose control. 
Don’t use cruise control on slippery roads.

Setting Cruise Control

CAUTION:

If you leave your cruise control switch on when
you’re not using cruise, you might hit a button
and go into cruise when you don’t want to. 
You could be startled and even lose control. 
Keep the cruise control switch off until you 
want to use cruise control.

1. Move the cruise control switch to ON.

2. Get up to the speed you want.

3. Press in the SET button

at the end of the lever
and release it.

4. Take your foot off the accelerator pedal.

Summary of Contents for 2002 Astro

















































































































































































































































































































































































































Reviews:

No comments