Chevrolet 2002 Astro Owner'S Manual Download Page 42 | Manualshive

Page: 42 / 400

Chevrolet 2002 Astro Owner'S Manual Download Page 42

1-35

Lap

-

Shoulder Belt

These positions have lap

-

shoulder belts. Here’s how to

wear one properly.

1. Pick up the latch plate and pull the belt across you.

Don’t let it get twisted.

2. Push the latch plate into the buckle until it clicks.

If the belt stops before it reaches the buckle, tilt the
latch plate and keep pulling until you can buckle it.
Pull up on the latch plate to make sure it is secure.

If the belt is not long enough, see “Safety Belt
Extender” at the end of this section.

Make sure the release button on the buckle is
positioned so you would be able to unbuckle the
safety belt quickly if you ever had to.

«
...
40
41
42
43
44
...
»

Summary of Contents for 2002 Astro

















































































































































































































































































































































































































Reviews:

No comments