Chevrolet 1977 Monte Carlo, Repair Manual

Page: 325 / 428

A U T O M A T IC T R A N S M IS S IO N S (4 0 0)7A -39
I N T E R M E D I A T E C L U T C H
RELEASE S P R I N G ( 3 )
Fi g . 7 A - 1 2 5 C - T e f l o n R i n g s
F ig . 7 A - 1 2 3 C - - l n s t a l l i n g I n t e r m e d i a t e C l u t c h R e l e a s e S p r i n g s
4. Install three (3) release springs into holes o f spring
guide. Space equally during assem bly (Fig. 7A -123C ).
5. Place spring retainer and snap ring over springs.
6. C om press springs and install snap ring (Fig. 7A -
124C).
7. Install four (4) oil seal rings on the center support.
W hen installing teflon oil seal rings, m ake sure slit ends are
assem bled in sam e relation as cut (Fig. 7A -125C ). A lso,
m ake sure oil seal rings are seated in ring grooves to prevent
dam age to rings during re-assem bly o f m ating parts over
rings. R etain w ith petrolatum .
8. A ir check operation o f interm ediate clu tch piston
(Fig. 7A -126C ).
Fig. 7A-1 24 C —Installing Intermediate Clutch Piston Snap Ring
Fig. 7 A - 1 2 6 C ~ A ir Checkin g Intermediate Clutch Piston