Chevrolet 1977 Monte Carlo, Repair Manual, Page: 228 / 428

7A 5-6 A U T O M A T IC TR A N SM IS S IO N
Figure 7A5-31 Low & Reverse Clutch Support Retaining Ring
Figure 7A 5-32 Anti-Clunk Spring
Figure 7A5-33 Output Shaft and Ring Gear Removal
Figure 7A 5-34 Low & Reverse Clutch Plate Removal
16. R em ove reaction carrier assembly, output ring gear,
shaft assembly, and clutch plates from case. (Figure 7A 5-35)
O U T P U T
R IN G G EA R
A N D S H A F T
ASSEM BLY
Figure 7A 5-35 Removing Output Carrier Assembly
17. R em ove reaction carrier assem bly from output ring
gear and shaft assembly.
18. R em ove reaction carrier to output ring gear needle
bearing (Figure 7A 5-35).
20. R em ove output ring gear to case needle bearing
assembly (Figure 7A 5-36).
21. Com press low and reverse clutch piston spring
retainer using T ool J-23327 and rem ove piston retaining
ring, spring retainer (Figure 7A 5-37) and springs. Inspect
springs for heat distortion.
22. R em ove low and reverse clutch piston assem bly by
applying com pressed air in passage show n on Figure 7A 5-
38.
23. R em ove low and reverse clutch piston outer seal
(Figure 7A 5-40).
24. R em ove low and reverse clutch piston center and
inner seal (Figure 7A 5-39).