Canon IR5000 - iR B/W Laser, Service Manual

Page: 776 / 839

COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
CHAPTER 5 SERVICE MODE
5-83 T
COPIER>OPTION
COUNTER5
Use it to change the type of soft counter 5 of the control panel to suit the
needs of the user or the dealer.
Settings 000 to 804 (T05-601-01; default, 000)
COUNTER6
Use it to change the type of soft counter 6 of the control panel to suit the
needs of the user or the dealer.
Settings 000 to 804 (T05-601-01; default: 000)
DATE-DSP
Use it to switch how the date is displayed.
Caution For the 120V model, the default is ‘1’.
Settings 0: YYYY MM/DD (default), 1: DD/MM YYYY, 2: MM/DD/YYYY
MB-CCV
Use it to impose limits on the Box function by the Control Card IV (CC-
IV).
Settings 0: enables control and printing regardless of presence/absence of card
in remote; in remote, makes no change
1: enables control and printing regardless of presence/absence of card
in remote; accepts print job, but stops printing in absence of card
(with card, enables printing but imposes charge; default)
2: disables control in remote; does not accept print job in remote
B4-L-CNT
Use it to specify whether B4 sheets are counted as large size or small size
for soft counters 1 through 6.
Settings 0: small size (default), 1: large size
TRAY-STP
Use it to prohibit suspension of printing by imposing limits to the number
of sheets to staple or mixing of sizes of the finisher.
Settings 0: normal mode (suspend printing by count/size; default)
1: suspend printing if height sensor is ON (full of paper)
MF-LG-ST
Use it to turn on the Extra Length key for sheets up to 630 mm (free in
manual feed); the 630 mm limit also applies to the ADF.
Settings 0: normal mode (default), 1: extra length mode (key indicated)
SPECK-DP
Use it to enable/disable indication of a warning for dust detection in stream
reading.
Settings 0: disable indication (default), 1: enable indication
Download Free Service Manual at http://printer1.blogspot.com