manualshive.com logo in svg

Canon IR5000 - iR B/W Laser, Service Manual

The Canon IR5000 - iR B/W Laser is a high-quality printing device designed to meet all your business needs. With its impressive speed and advanced features, this multifunctional printer ensures exceptional performance. Need guidance on operating it? Download the free service manual from manualshive.com to maximize the potential of this outstanding machine.

Share
Download
background image

COPYRIGHT © 2000 CANON INC. 

2000 2000 2000 2000

 CANON iR5000/iR6000 REV.0 JULY 2000

CHAPTER 1 MAINTENANCE AND INSPECTION

1-8 T

8. Clean each filter by removing matter adhering to its surface: 1. ozone filter, 2. dust-

proofing filter.

9. Clean the developing assembly (developing assembly rolls).
10. Clean the pickup/feeding assembly: 1. transfer guide (upper/lower) plate, 2. registration

roller (upper, lower), 3. feeding belt, 4. each feeding roller.

11. Clean the fixing/delivery assembly: 1. separation law (upper, lower), 2. each feeding

roller, 3. inlet guide, 4. web (check), 5. inlet guide oil dish, 6. thermistor, 7. sub ther-
mistor, 8. thermal switch.

12. Clean the cleaning assembly (side scraper).
13. Clean the copyboard glass and the reading glass.
14. Make test prints.
15. Make sample prints.
16. Check the operation of the leakage breaker:

While the power switch is on, press the test
switch of the leakage breaker to see that it oper-
ates normally (i.e., the lever shifts to ‘OFF’ and
the power is cut). If it does not operate normally,
replace it and make a check once again.
To reset,
After checking its operation, turn off the power
switch, shift the lever to ‘ON’, and turn on the
power switch.

17. Put the sample prints into order; then, clean up the area around the machine.
18. Record the final counter reading.
19. Fill out the Service Book, and report to the person in charge.

Do not forget to add the above check to the history of checks made on the leakage
breaker (Service Book).

Leakage breaker

Download Free Service Manual at http://printer1.blogspot.com

Summary of Contents for IR5000 - iR B/W Laser








































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IR5000 - iR B/W Laser

Canon C3226i Quick Start Manual preview
C3226i
Brand: Canon Pages: 20
Avision ScanCopier Service Manual preview
ScanCopier
Brand: Avision Pages: 51
Avision DS310F User Manual preview
DS310F
Brand: Avision Pages: 65

Brands by name

Popular brands

Load more brands