manualshive.com logo in svg

Canon IR5000 - iR B/W Laser, Service Manual

The Canon IR5000 - iR B/W Laser is a high-quality printing device designed to meet all your business needs. With its impressive speed and advanced features, this multifunctional printer ensures exceptional performance. Need guidance on operating it? Download the free service manual from manualshive.com to maximize the potential of this outstanding machine.

Share
Download
background image

COPYRIGHT © 2000 CANON INC. 

2000 2000 2000 2000

 CANON iR5000/iR6000 REV.0 JULY 2000

CHAPTER 5 SERVICE MODE

5-64 T

<LASER>

Using Laser-Related Operations

POWER

Turning On the Laser
Using the Mode
1) Select the mode item, and press the OK key.
•

The laser turns on.

•

The laser turns off automatically in 30 sec. (To turn it off earlier, press
the Stop key.)

<DPC>

Using Potential Sensor-Related Operations

DPC

Use it to force potential control.

Caution

The machine will not execute potential control when the power switch is

turned off and then on if the temperature of the fixing assembly is 150ºC or
higher. If you have replaced the photosensitive drum or the laser unit, or
changed the drum potential setting, execute potential control using this
mode item.
Using the Mode
1) Select the mode item, and  enter ‘1’, then, press the OK key.
2) Turn off and then on the power switch.
•

The machine will execute potential control.

OFST

Use it to execute offset adjustment for the potential sensor.

Caution

Do not execute this mode on its own; it is designed as part of a series of

work to perform after replacing the potential sensor unit. (See the Printer
Manual: Chap. 4, 7. “Disassembly and Assembly.”)
Using the Mode
1) Select the mode item, and press the OK key.
•

The machine stops the operation automatically at the end of offset
adjustment.

COPIER>FUNCTION

Download Free Service Manual at http://printer1.blogspot.com

Summary of Contents for IR5000 - iR B/W Laser








































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IR5000 - iR B/W Laser

Canon NP-1215 Service Manual preview
NP-1215
Brand: Canon Pages: 214
Canon C3226i Quick Start Manual preview
C3226i
Brand: Canon Pages: 20
Duplo DUPRINTER DP-330e Instruction Manual preview
DUPRINTER DP-330e
Brand: Duplo Pages: 141

Brands by name

Popular brands

Load more brands