Canon IR5000 - iR B/W Laser Service Manual Download

Page: 369 / 839

2000 2000 2000 2000

CANON iR5000/iR6000 REV.0 JULY 2000

CHAPTER 5 PICK UP/FEEDING SYSTEM

5-70 P

9.6 Duplex Unit

9.6.1 Removing the Duplex Unit

1) Slide the duplex unit out of the ma-

chine.

2) Remove the three screws [1] and two

knobs [2]; then, detach the front cover
[3].

3) Holding the left and right grips [4] of

the duplex unit, take it out of the ma-
chine.

Take care not to trap your hand
between the grip and the rail.
Further, do not place the duplex
unit where it may suffer dam-
age.

F05-906-01

9.6.2 Removing the Reversing Flapper Solenoid

1) Remove the duplex unit from the ma-

chine.

2) Disconnect the connector [1], and free

the harness [3] from the guide [2].

3) Remove the two mounting screws [4],

and detach the reversing flapper sole-
noid [5].
(The steps of installation refer to 9.6.17
“Mounting the Reversing Flapper
solenoid”.)

F05-906-02

9.6.3 Removing the Reversal Motor

1) Remove the front cover of the duplex

unit.

2) Disconnect the connector [1].
3) Remove the three mounting screws [2],

and detach the reversal motor [3] to-
gether with its support plate.

F05-906-03

[1]

[2]

[3]

[4]

[1]

[2]

[3]

[4]

[5]

[4]

[2]

[3]

[2]

[1]

Download Free Service Manual at http://printer1.blogspot.com

Summary of Contents for IR5000 - iR B/W Laser
















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IR5000 - iR B/W Laser

Reviews:

Related manuals for IR5000 - iR B/W Laser

Brands by name

Popular brands

Canon IR5000 - iR B/W Laser, Service Manual

Search results

Summary of Contents for IR5000 - iR B/W Laser

Reviews:

Related manuals for IR5000 - iR B/W Laser

Brands by name

Popular brands