manualshive.com logo in svg

Canon IR5000 - iR B/W Laser, Service Manual

Share
Download
Canon IR5000 - iR B/W Laser Service Manual Download Page 526

COPYRIGHT © 2000 CANON INC. 

2000 2000 2000 2000

 CANON iR5000/iR6000 REV.0 JULY 2000

CHAPTER 9 SHIFT TRAY

9-5 P

4. Outline of Operations

4.1 Shifting

The machine shifts the tray to the front and the rear (over a distance of 55 mm) to sort

(offset) sheets into groups. The tray is driven by a DC motor, and the rotation of the motor is
converted into shifting motions by means of a rack and pinion gears.

The stop position of the tray at the front and the rear is controlled by the HP sensors

mounted to the front and the rear.

F09-401-01

4.2 Stacking

The machine’s tray is supported by coil springs, and the tray moves down under the

weight of the paper deposited on it. The stack is monitored by limit sensors (reflecting type
photosensors); when the stack reaches a specific height, the shift tray driver PCB sends the
FULL signal to the host machine.

F09-402-01

Light-blocking plate

HP sensor (PS102; rear)

HP sensor (PS101; front)

Tray drive unit

Stacking enabled

Limit sensor (PS104; rear)

Limit sensor (PS105; front)

Shaft

Shaft

Tray

Stacking enabled

Stacking disabled

Download Free Service Manual at http://printer1.blogspot.com

Summary of Contents for IR5000 - iR B/W Laser








































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands