manualshive.com logo in svg

Canon IR5000 - iR B/W Laser, Service Manual

The Canon IR5000 - iR B/W Laser is a high-quality printing device designed to meet all your business needs. With its impressive speed and advanced features, this multifunctional printer ensures exceptional performance. Need guidance on operating it? Download the free service manual from manualshive.com to maximize the potential of this outstanding machine.

Share
Download
background image

COPYRIGHT © 2000 CANON INC. 

2000 2000 2000 2000

 CANON iR5000/iR6000 REV.0 JULY 2000

CHAPTER 5 SERVICE MODE

5-74 T

COPIER>FUNCTION

<SENS-AJD>

Use it to check the operation of sensors.

STCK-LMT

Use it to adjust the position of the full sensor (PS104, PS105) of the shift
tray.
•

If either of the full sensors (or both) detects paper, the machine will in-

dicate

‘ON’.

•

If neither of the sensors detects paper, the machine will indicate ‘OFF’.

Caution

•

Use this mode when the full sensor has been replaced.

•

Be sure to move the sensors starting at the point farthest from the paper,
moving them closer to the paper (in keeping with the characteristics of
the sensors).

Using the Mode
1) Keep both sensors at the point farthest from the paper.
2) Place a stack of sheets (about 60 mm high) at the point of detection of

either sensor on the shift tray.

3) Select the mode item, and press the OK key.
4) By referring to the indication, move the sensor closer to the paper, and

fix it in position where the indication changes to ‘ON’.

5) Move the paper to the position of detection of the other sensor.
6) Repeat step 4) for the other sensor.
7) Press the Stop key to end the adjustment.

<SYSTEM>

Checking System-Related Operations

DOWNLOAD

Use it to switch to download mode of the system program.

Caution

Using the Mode
1) Turn off the machine and the PC.
2) Disconnect the network-related cable connected to the machine.
3) Connect the machine with the PC with a bi-Centronics cable.
4) Turn on the PC.
5) Turn on the machine.
6) Select the mode item, and press the OK key.
7) Start downloading using the service support tool.
8) At the end of the operation, turn off and then on the main power switch.

Download Free Service Manual at http://printer1.blogspot.com

Summary of Contents for IR5000 - iR B/W Laser








































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IR5000 - iR B/W Laser

Triumph Adler DC 2242 Instruction Handbook Manual preview
DC 2242
Brand: Triumph Adler Pages: 424
Lanier 5415MFD Operator'S Manual preview
5415MFD
Brand: Lanier Pages: 258
TASKalfa 3500i Troubleshooting Manual preview
3500i
Brand: TASKalfa Pages: 112
Xerox XC351 User Manual preview
XC351
Brand: Xerox Pages: 50
Xerox 4595 Getting Started preview
4595
Brand: Xerox Pages: 72
Canon imageRunner Advance 6275 Basic Operation Gude preview
imageRunner Advance 6275
Brand: Canon Pages: 214
Utax CLP 3416 Instruction Handbook Manual preview
CLP 3416
Brand: Utax Pages: 166
Ricoh PS430 Installation Manual preview
PS430
Brand: Ricoh Pages: 4

Brands by name

Popular brands

Load more brands