Canon imageclass MF229DW, User Manual

Page: 62 / 522

0KCY-023
Adjusting the Volume
The machine produces sounds in a variety of situations, such as when fax sending is complete or when a paper jam or error occurs. You
can set the volume of each of these sounds individually.
Press and tap <Menu>.
Tap <Preferences>.
Tap <Sound Volume Control>.
Select a setting.
Setting Description Procedure
<Fax Tone> Sound produced during a fax transmission
Go to step 5.
<Ring Tone> Sound produced when an incoming fax is received
<TX Done
Tone>
Sound produced when fax sending is complete
Go to step 5.
<RX Done
Tone>
Sound produced when fax receiving is complete
<Scanning Done
Tone>
Sound produced when fax document scanning is complete
<Entry Tone>
Confirmation sound each time a key on the operation panel or button
on the display is pressed
Select <On> (produce a tone)
or <Off> (not produce a tone).
<Invalid Entry
Tone> Sound produced when an invalid key operation is performed, such as
when you enter a number outside the valid setting range
<Warning
Tone>
Sound produced when a paper jam or other error occurs
<Job Done
Tone> Sound produced when an operation such as copying or scanning is
complete
<Energy Saver
Alert>
Sound produced when the machine enters or exits sleep mode
<Original in
Feeder
Detection
Tone>
Sound produced when an original is loaded in the feeder
Use / to set volume, tap <Apply>.
1
2
3
4
5
㻢㻞㻌㻛㻌㻠㻣㻡
Downloaded from ManualsPrinter.com Manuals